add fontconfigs and cleanup

5 files changed, 42 insertions, 1366 deletions

diff --git a/config/fontconfig/fonts.conf b/config/fontconfig/fonts.conf
new file mode 100644
index 0000000..1ba85c6
--- /dev/null
+++ b/config/fontconfig/fonts.conf
@@ -0,0 +1,26 @@
+<?xml version='1.0'?>
+<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
+<fontconfig>
+
+    <match target="pattern">
+        <test qual="any" name="family"><string>monospace</string></test>
+        <edit name="family" mode="append" binding="weak"><string>Noto Color Emoji</string></edit>        
+        <edit name="family" mode="append" binding="weak"><string>Hack</string></edit>
+    </match>
+
+    <match target="pattern">
+        <test qual="any" name="family"><string>serif</string></test>
+        <edit name="family" mode="append" binding="weak"><string>Noto Color Emoji</string></edit>
+    </match>
+
+    <match target="pattern">
+        <test qual="any" name="family"><string>sans-serif</string></test>
+        <edit name="family" mode="append" binding="weak"><string>Noto Color Emoji</string></edit>
+    </match>
+
+    <match target="pattern">
+        <test qual="any" name="family"><string>emoji</string></test>
+        <edit name="family" mode="assign" binding="same"><string>Noto Color Emoji</string></edit>
+    </match>
+
+</fontconfig>
diff --git a/dotbot b/dotbot
-Subproject 4ec846cdad4c5f6996523e7015f0b36a6b40e9f
+Subproject dcb37431157e52736911b0099cdb34d156a8b81
diff --git a/gpg-agent.conf b/gnupg/gpg-agent.conf
index 58c6ceb..58c6ceb 100644
--- a/gpg-agent.conf
+++ b/gnupg/gpg-agent.conf
diff --git a/install.conf.yaml b/install.conf.yaml
index 858a1ea..791d0d9 100644
--- a/install.conf.yaml
+++ b/install.conf.yaml
@@ -1,27 +1,26 @@
 - defaults:
-    link:
-      relink: true
+  link:
+    relink: true
 
 - clean: ['~']
 
 - create:
-    - ~/.cache
-    - ~/.config
-- create:
-    ~/.gnupg:
-      mode: 0700
+  ~/.gnupg:
+    mode: 0700
 
 - link:
-    ~/.vimrc: vimrc
-    ~/.zshrc:
-      path: zshrc
-      force: true
-    ~/.config/kitty/kitty.conf:
-      path: kitty/kitty.conf
-      create: true
-    ~/.gnupg/gpg-agent.conf:
-      path: gpg-agent.conf
-      create: true
+  ~/.config/fontconfig/fonts.conf:
+    path: config/fontconfig/fonts.conf
+    create: true
+    force: true
+  ~/.gnupg/gpg-agent.conf:
+    path: gnupg/gpg-agent.conf
+  ~/.vimrc:
+    path: vimrc
+    force: true
+  ~/.zshrc:
+    path: zshrc
+    force: true
 
 - shell:
   - [git submodule update --init --recursive, Installing submodules]
diff --git a/kitty/kitty.conf b/kitty/kitty.conf
deleted file mode 100644
index 1d06a74..0000000
--- a/kitty/kitty.conf
+++ /dev/null
@@ -1,1349 +0,0 @@
-# vim:fileencoding=utf-8:ft=conf:foldmethod=marker
-
-#: Fonts {{{
-
-#: kitty has very powerful font management. You can configure
-#: individual font faces and even specify special fonts for particular
-#: characters.
-
-# font_family      monospace
-# bold_font        auto
-# italic_font      auto
-# bold_italic_font auto
-
-#: You can specify different fonts for the bold/italic/bold-italic
-#: variants. To get a full list of supported fonts use the `kitty
-#: list-fonts` command. By default they are derived automatically, by
-#: the OSes font system. Setting them manually is useful for font
-#: families that have many weight variants like Book, Medium, Thick,
-#: etc. For example::
-
-#:     font_family      Operator Mono Book
-#:     bold_font        Operator Mono Medium
-#:     italic_font      Operator Mono Book Italic
-#:     bold_italic_font Operator Mono Medium Italic
-
-# font_size 11.0
-
-#: Font size (in pts)
-
-# force_ltr no
-
-#: kitty does not support BIDI (bidirectional text), however, for RTL
-#: scripts, words are automatically displayed in RTL. That is to say,
-#: in an RTL script, the words "HELLO WORLD" display in kitty as
-#: "WORLD HELLO", and if you try to select a substring of an RTL-
-#: shaped string, you will get the character that would be there had
-#: the the string been LTR. For example, assuming the Hebrew word
-#: ירושלים, selecting the character that on the screen appears to be ם
-#: actually writes into the selection buffer the character י.
-
-#: kitty's default behavior is useful in conjunction with a filter to
-#: reverse the word order, however, if you wish to manipulate RTL
-#: glyphs, it can be very challenging to work with, so this option is
-#: provided to turn it off. Furthermore, this option can be used with
-#: the command line program GNU FriBidi
-#: <https://github.com/fribidi/fribidi#executable> to get BIDI
-#: support, because it will force kitty to always treat the text as
-#: LTR, which FriBidi expects for terminals.
-
-# adjust_line_height  0
-# adjust_column_width 0
-
-#: Change the size of each character cell kitty renders. You can use
-#: either numbers, which are interpreted as pixels or percentages
-#: (number followed by %), which are interpreted as percentages of the
-#: unmodified values. You can use negative pixels or percentages less
-#: than 100% to reduce sizes (but this might cause rendering
-#: artifacts).
-
-# symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols
-
-#: Map the specified unicode codepoints to a particular font. Useful
-#: if you need special rendering for some symbols, such as for
-#: Powerline. Avoids the need for patched fonts. Each unicode code
-#: point is specified in the form U+<code point in hexadecimal>. You
-#: can specify multiple code points, separated by commas and ranges
-#: separated by hyphens. symbol_map itself can be specified multiple
-#: times. Syntax is::
-
-#:     symbol_map codepoints Font Family Name
-
-# disable_ligatures never
-
-#: Choose how you want to handle multi-character ligatures. The
-#: default is to always render them.  You can tell kitty to not render
-#: them when the cursor is over them by using cursor to make editing
-#: easier, or have kitty never render them at all by using always, if
-#: you don't like them. The ligature strategy can be set per-window
-#: either using the kitty remote control facility or by defining
-#: shortcuts for it in kitty.conf, for example::
-
-#:     map alt+1 disable_ligatures_in active always
-#:     map alt+2 disable_ligatures_in all never
-#:     map alt+3 disable_ligatures_in tab cursor
-
-#: Note that this refers to programming ligatures, typically
-#: implemented using the calt OpenType feature. For disabling general
-#: ligatures, use the font_features setting.
-
-# font_features none
-
-#: Choose exactly which OpenType features to enable or disable. This
-#: is useful as some fonts might have features worthwhile in a
-#: terminal. For example, Fira Code Retina includes a discretionary
-#: feature, zero, which in that font changes the appearance of the
-#: zero (0), to make it more easily distinguishable from Ø. Fira Code
-#: Retina also includes other discretionary features known as
-#: Stylistic Sets which have the tags ss01 through ss20.
-
-#: Note that this code is indexed by PostScript name, and not the font
-#: family. This allows you to define very precise feature settings;
-#: e.g. you can disable a feature in the italic font but not in the
-#: regular font.
-
-#: On Linux, these are read from the FontConfig database first and
-#: then this, setting is applied, so they can be configured in a
-#: single, central place.
-
-#: To get the PostScript name for a font, use kitty + list-fonts
-#: --psnames:
-
-#: .. code-block:: sh
-
-#:     $ kitty + list-fonts --psnames | grep Fira
-#:     Fira Code
-#:     Fira Code Bold (FiraCode-Bold)
-#:     Fira Code Light (FiraCode-Light)
-#:     Fira Code Medium (FiraCode-Medium)
-#:     Fira Code Regular (FiraCode-Regular)
-#:     Fira Code Retina (FiraCode-Retina)
-
-#: The part in brackets is the PostScript name.
-
-#: Enable alternate zero and oldstyle numerals::
-
-#:     font_features FiraCode-Retina +zero +onum
-
-#: Enable only alternate zero::
-
-#:     font_features FiraCode-Retina +zero
-
-#: Disable the normal ligatures, but keep the calt feature which (in
-#: this font) breaks up monotony::
-
-#:     font_features TT2020StyleB-Regular -liga +calt
-
-#: In conjunction with force_ltr, you may want to disable Arabic
-#: shaping entirely, and only look at their isolated forms if they
-#: show up in a document. You can do this with e.g.::
-
-#:     font_features UnifontMedium +isol -medi -fina -init
-
-# box_drawing_scale 0.001, 1, 1.5, 2
-
-#: Change the sizes of the lines used for the box drawing unicode
-#: characters These values are in pts. They will be scaled by the
-#: monitor DPI to arrive at a pixel value. There must be four values
-#: corresponding to thin, normal, thick, and very thick lines.
-
-#: }}}
-
-#: Cursor customization {{{
-
-# cursor #cccccc
-
-#: Default cursor color
-
-# cursor_text_color #111111
-
-#: Choose the color of text under the cursor. If you want it rendered
-#: with the background color of the cell underneath instead, use the
-#: special keyword: background
-
-cursor_shape block
-
-#: The cursor shape can be one of (block, beam, underline)
-
-# cursor_beam_thickness 1.5
-
-#: Defines the thickness of the beam cursor (in pts)
-
-# cursor_underline_thickness 2.0
-
-#: Defines the thickness of the underline cursor (in pts)
-
-cursor_blink_interval 0
-
-#: The interval (in seconds) at which to blink the cursor. Set to zero
-#: to disable blinking. Negative values mean use system default. Note
-#: that numbers smaller than repaint_delay will be limited to
-#: repaint_delay.
-
-# cursor_stop_blinking_after 15.0
-
-#: Stop blinking cursor after the specified number of seconds of
-#: keyboard inactivity.  Set to zero to never stop blinking.
-
-#: }}}
-
-#: Scrollback {{{
-
-# scrollback_lines 2000
-
-#: Number of lines of history to keep in memory for scrolling back.
-#: Memory is allocated on demand. Negative numbers are (effectively)
-#: infinite scrollback. Note that using very large scrollback is not
-#: recommended as it can slow down performance of the terminal and
-#: also use large amounts of RAM. Instead, consider using
-#: scrollback_pager_history_size.
-
-# scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER
-
-#: Program with which to view scrollback in a new window. The
-#: scrollback buffer is passed as STDIN to this program. If you change
-#: it, make sure the program you use can handle ANSI escape sequences
-#: for colors and text formatting. INPUT_LINE_NUMBER in the command
-#: line above will be replaced by an integer representing which line
-#: should be at the top of the screen. Similarly CURSOR_LINE and
-#: CURSOR_COLUMN will be replaced by the current cursor position.
-
-# scrollback_pager_history_size 0
-
-#: Separate scrollback history size, used only for browsing the
-#: scrollback buffer (in MB). This separate buffer is not available
-#: for interactive scrolling but will be piped to the pager program
-#: when viewing scrollback buffer in a separate window. The current
-#: implementation stores the data in UTF-8, so approximatively 10000
-#: lines per megabyte at 100 chars per line, for pure ASCII text,
-#: unformatted text. A value of zero or less disables this feature.
-#: The maximum allowed size is 4GB.
-
-# wheel_scroll_multiplier 5.0
-
-#: Modify the amount scrolled by the mouse wheel. Note this is only
-#: used for low precision scrolling devices, not for high precision
-#: scrolling on platforms such as macOS and Wayland. Use negative
-#: numbers to change scroll direction.
-
-# touch_scroll_multiplier 1.0
-
-#: Modify the amount scrolled by a touchpad. Note this is only used
-#: for high precision scrolling devices on platforms such as macOS and
-#: Wayland. Use negative numbers to change scroll direction.
-
-#: }}}
-
-#: Mouse {{{
-
-# mouse_hide_wait 0.0
-
-#: Hide mouse cursor after the specified number of seconds of the
-#: mouse not being used. Set to zero to disable mouse cursor hiding.
-#: Set to a negative value to hide the mouse cursor immediately when
-#: typing text. Disabled by default on macOS as getting it to work
-#: robustly with the ever-changing sea of bugs that is Cocoa is too
-#: much effort.
-
-# url_color #0087bd
-# url_style curly
-
-#: The color and style for highlighting URLs on mouse-over. url_style
-#: can be one of: none, single, double, curly
-
-# open_url_modifiers kitty_mod
-
-#: The modifier keys to press when clicking with the mouse on URLs to
-#: open the URL
-
-# open_url_with default
-
-#: The program with which to open URLs that are clicked on. The
-#: special value default means to use the operating system's default
-#: URL handler.
-
-# url_prefixes http https file ftp
-
-#: The set of URL prefixes to look for when detecting a URL under the
-#: mouse cursor.
-
-# detect_urls yes
-
-#: Detect URLs under the mouse. Detected URLs are highlighted with an
-#: underline and the mouse cursor becomes a hand over them. Even if
-#: this option is disabled, URLs are still clickable.
-
-copy_on_select clipboard
-
-#: Copy to clipboard or a private buffer on select. With this set to
-#: clipboard, simply selecting text with the mouse will cause the text
-#: to be copied to clipboard. Useful on platforms such as macOS that
-#: do not have the concept of primary selections. You can instead
-#: specify a name such as a1 to copy to a private kitty buffer
-#: instead. Map a shortcut with the paste_from_buffer action to paste
-#: from this private buffer. For example::
-
-#:     map cmd+shift+v paste_from_buffer a1
-
-#: Note that copying to the clipboard is a security risk, as all
-#: programs, including websites open in your browser can read the
-#: contents of the system clipboard.
-
-# strip_trailing_spaces never
-
-#: Remove spaces at the end of lines when copying to clipboard. A
-#: value of smart will do it when using normal selections, but not
-#: rectangle selections. always will always do it.
-
-# rectangle_select_modifiers ctrl+alt
-
-#: The modifiers to use rectangular selection (i.e. to select text in
-#: a rectangular block with the mouse)
-
-# terminal_select_modifiers shift
-
-#: The modifiers to override mouse selection even when a terminal
-#: application has grabbed the mouse
-
-# select_by_word_characters @-./_~?&=%+#
-
-#: Characters considered part of a word when double clicking. In
-#: addition to these characters any character that is marked as an
-#: alphanumeric character in the unicode database will be matched.
-
-# click_interval -1.0
-
-#: The interval between successive clicks to detect double/triple
-#: clicks (in seconds). Negative numbers will use the system default
-#: instead, if available, or fallback to 0.5.
-
-# focus_follows_mouse no
-
-#: Set the active window to the window under the mouse when moving the
-#: mouse around
-
-# pointer_shape_when_grabbed arrow
-
-#: The shape of the mouse pointer when the program running in the
-#: terminal grabs the mouse. Valid values are: arrow, beam and hand
-
-# default_pointer_shape beam
-
-#: The default shape of the mouse pointer. Valid values are: arrow,
-#: beam and hand
-
-# pointer_shape_when_dragging beam
-
-#: The default shape of the mouse pointer when dragging across text.
-#: Valid values are: arrow, beam and hand
-
-#: }}}
-
-#: Performance tuning {{{
-
-# repaint_delay 10
-
-#: Delay (in milliseconds) between screen updates. Decreasing it,
-#: increases frames-per-second (FPS) at the cost of more CPU usage.
-#: The default value yields ~100 FPS which is more than sufficient for
-#: most uses. Note that to actually achieve 100 FPS you have to either
-#: set sync_to_monitor to no or use a monitor with a high refresh
-#: rate. Also, to minimize latency when there is pending input to be
-#: processed, repaint_delay is ignored.
-
-# input_delay 3
-
-#: Delay (in milliseconds) before input from the program running in
-#: the terminal is processed. Note that decreasing it will increase
-#: responsiveness, but also increase CPU usage and might cause flicker
-#: in full screen programs that redraw the entire screen on each loop,
-#: because kitty is so fast that partial screen updates will be drawn.
-
-# sync_to_monitor yes
-
-#: Sync screen updates to the refresh rate of the monitor. This
-#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
-#: when scrolling. However, it limits the rendering speed to the
-#: refresh rate of your monitor. With a very high speed mouse/high
-#: keyboard repeat rate, you may notice some slight input latency. If
-#: so, set this to no.
-
-#: }}}
-
-#: Terminal bell {{{
-
-enable_audio_bell no
-
-#: Enable/disable the audio bell. Useful in environments that require
-#: silence.
-
-# visual_bell_duration 0.0
-
-#: Visual bell duration. Flash the screen when a bell occurs for the
-#: specified number of seconds. Set to zero to disable.
-
-# window_alert_on_bell yes
-
-#: Request window attention on bell. Makes the dock icon bounce on
-#: macOS or the taskbar flash on linux.
-
-# bell_on_tab yes
-
-#: Show a bell symbol on the tab if a bell occurs in one of the
-#: windows in the tab and the window is not the currently focused
-#: window
-
-# command_on_bell none
-
-#: Program to run when a bell occurs.
-
-#: }}}
-
-#: Window layout {{{
-
-# remember_window_size  yes
-# initial_window_width  640
-# initial_window_height 400
-
-#: If enabled, the window size will be remembered so that new
-#: instances of kitty will have the same size as the previous
-#: instance. If disabled, the window will initially have size
-#: configured by initial_window_width/height, in pixels. You can use a
-#: suffix of "c" on the width/height values to have them interpreted
-#: as number of cells instead of pixels.
-
-# enabled_layouts *
-
-#: The enabled window layouts. A comma separated list of layout names.
-#: The special value all means all layouts. The first listed layout
-#: will be used as the startup layout. Default configuration is all
-#: layouts in alphabetical order. For a list of available layouts, see
-#: the https://sw.kovidgoyal.net/kitty/index.html#layouts.
-
-# window_resize_step_cells 2
-# window_resize_step_lines 2
-
-#: The step size (in units of cell width/cell height) to use when
-#: resizing windows. The cells value is used for horizontal resizing
-#: and the lines value for vertical resizing.
-
-# window_border_width 0.5pt
-
-#: The width of window borders. Can be either in pixels (px) or pts
-#: (pt). Values in pts will be rounded to the nearest number of pixels
-#: based on screen resolution. If not specified the unit is assumed to
-#: be pts. Note that borders are displayed only when more than one
-#: window is visible. They are meant to separate multiple windows.
-
-# draw_minimal_borders yes
-
-#: Draw only the minimum borders needed. This means that only the
-#: minimum needed borders for inactive windows are drawn. That is only
-#: the borders that separate the inactive window from a neighbor. Note
-#: that setting a non-zero window margin overrides this and causes all
-#: borders to be drawn.
-
-# window_margin_width 0
-
-#: The window margin (in pts) (blank area outside the border). A
-#: single value sets all four sides. Two values set the vertical and
-#: horizontal sides. Three values set top, horizontal and bottom. Four
-#: values set top, right, bottom and left.
-
-# single_window_margin_width -1
-
-#: The window margin (in pts) to use when only a single window is
-#: visible. Negative values will cause the value of
-#: window_margin_width to be used instead. A single value sets all
-#: four sides. Two values set the vertical and horizontal sides. Three
-#: values set top, horizontal and bottom. Four values set top, right,
-#: bottom and left.
-
-# window_padding_width 0
-
-#: The window padding (in pts) (blank area between the text and the
-#: window border). A single value sets all four sides. Two values set
-#: the vertical and horizontal sides. Three values set top, horizontal
-#: and bottom. Four values set top, right, bottom and left.
-
-# placement_strategy center
-
-#: When the window size is not an exact multiple of the cell size, the
-#: cell area of the terminal window will have some extra padding on
-#: the sides. You can control how that padding is distributed with
-#: this option. Using a value of center means the cell area will be
-#: placed centrally. A value of top-left means the padding will be on
-#: only the bottom and right edges.
-
-# active_border_color #00ff00
-
-#: The color for the border of the active window. Set this to none to
-#: not draw borders around the active window.
-
-# inactive_border_color #cccccc
-
-#: The color for the border of inactive windows
-
-# bell_border_color #ff5a00
-
-#: The color for the border of inactive windows in which a bell has
-#: occurred
-
-# inactive_text_alpha 1.0
-
-#: Fade the text in inactive windows by the specified amount (a number
-#: between zero and one, with zero being fully faded).
-
-# hide_window_decorations no
-
-#: Hide the window decorations (title-bar and window borders) with
-#: yes. On macOS, titlebar-only can be used to only hide the titlebar.
-#: Whether this works and exactly what effect it has depends on the
-#: window manager/operating system.
-
-# resize_debounce_time 0.1
-
-#: The time (in seconds) to wait before redrawing the screen when a
-#: resize event is received. On platforms such as macOS, where the
-#: operating system sends events corresponding to the start and end of
-#: a resize, this number is ignored.
-
-# resize_draw_strategy static
-
-#: Choose how kitty draws a window while a resize is in progress. A
-#: value of static means draw the current window contents, mostly
-#: unchanged. A value of scale means draw the current window contents
-#: scaled. A value of blank means draw a blank window. A value of size
-#: means show the window size in cells.
-
-# resize_in_steps no
-
-#: Resize the OS window in steps as large as the cells, instead of
-#: with the usual pixel accuracy. Combined with an
-#: initial_window_width and initial_window_height in number of cells,
-#: this option can be used to keep the margins as small as possible
-#: when resizing the OS window. Note that this does not currently work
-#: on Wayland.
-
-# confirm_os_window_close 0
-
-#: Ask for confirmation when closing an OS window or a tab that has at
-#: least this number of kitty windows in it. A value of zero disables
-#: confirmation. This confirmation also applies to requests to quit
-#: the entire application (all OS windows, via the quit action).
-
-#: }}}
-
-#: Tab bar {{{
-
-# tab_bar_edge bottom
-
-#: Which edge to show the tab bar on, top or bottom
-
-# tab_bar_margin_width 0.0
-
-#: The margin to the left and right of the tab bar (in pts)
-
-tab_bar_style separator
-
-#: The tab bar style, can be one of: fade, separator, powerline, or
-#: hidden. In the fade style, each tab's edges fade into the
-#: background color, in the separator style, tabs are separated by a
-#: configurable separator, and the powerline shows the tabs as a
-#: continuous line. If you use the hidden style, you might want to
-#: create a mapping for the select_tab action which presents you with
-#: a list of tabs and allows for easy switching to a tab.
-
-# tab_bar_min_tabs 2
-
-#: The minimum number of tabs that must exist before the tab bar is
-#: shown
-
-# tab_switch_strategy previous
-
-#: The algorithm to use when switching to a tab when the current tab
-#: is closed. The default of previous will switch to the last used
-#: tab. A value of left will switch to the tab to the left of the
-#: closed tab. A value of right will switch to the tab to the right of
-#: the closed tab. A value of last will switch to the right-most tab.
-
-# tab_fade 0.25 0.5 0.75 1
-
-#: Control how each tab fades into the background when using fade for
-#: the tab_bar_style. Each number is an alpha (between zero and one)
-#: that controls how much the corresponding cell fades into the
-#: background, with zero being no fade and one being full fade. You
-#: can change the number of cells used by adding/removing entries to
-#: this list.
-
-# tab_separator " ┇"
-
-#: The separator between tabs in the tab bar when using separator as
-#: the tab_bar_style.
-
-# tab_activity_symbol none
-
-#: Some text or a unicode symbol to show on the tab if a window in the
-#: tab that does not have focus has some activity.
-
-# tab_title_template "{title}"
-
-#: A template to render the tab title. The default just renders the
-#: title. If you wish to include the tab-index as well, use something
-#: like: {index}: {title}. Useful if you have shortcuts mapped for
-#: goto_tab N. In addition you can use {layout_name} for the current
-#: layout name and {num_windows} for the number of windows in the tab.
-#: Note that formatting is done by Python's string formatting
-#: machinery, so you can use, for instance, {layout_name[:2].upper()}
-#: to show only the first two letters of the layout name, upper-cased.
-#: If you want to style the text, you can use styling directives, for
-#: example: {fmt.fg.red}red{fmt.fg.default}normal{fmt.bg._00FF00}green
-#: bg{fmt.bg.normal}. Similarly, for bold and italic:
-#: {fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}.
-
-# active_tab_title_template none
-
-#: Template to use for active tabs, if not specified falls back to
-#: tab_title_template.
-
-# active_tab_foreground   #000
-# active_tab_background   #eee
-# active_tab_font_style   bold-italic
-# inactive_tab_foreground #444
-# inactive_tab_background #999
-# inactive_tab_font_style normal
-
-#: Tab bar colors and styles
-
-# tab_bar_background none
-
-#: Background color for the tab bar. Defaults to using the terminal
-#: background color.
-
-#: }}}
-
-#: Color scheme {{{
-
-# foreground #dddddd
-# background #000000
-
-#: The foreground and background colors
-
-# background_opacity 1.0
-
-#: The opacity of the background. A number between 0 and 1, where 1 is
-#: opaque and 0 is fully transparent.  This will only work if
-#: supported by the OS (for instance, when using a compositor under
-#: X11). Note that it only sets the background color's opacity in
-#: cells that have the same background color as the default terminal
-#: background. This is so that things like the status bar in vim,
-#: powerline prompts, etc. still look good.  But it means that if you
-#: use a color theme with a background color in your editor, it will
-#: not be rendered as transparent.  Instead you should change the
-#: default background color in your kitty config and not use a
-#: background color in the editor color scheme. Or use the escape
-#: codes to set the terminals default colors in a shell script to
-#: launch your editor.  Be aware that using a value less than 1.0 is a
-#: (possibly significant) performance hit.  If you want to dynamically
-#: change transparency of windows set dynamic_background_opacity to
-#: yes (this is off by default as it has a performance cost)
-
-# background_image none
-
-#: Path to a background image. Must be in PNG format.
-
-# background_image_layout tiled
-
-#: Whether to tile or scale the background image.
-
-# background_image_linear no
-
-#: When background image is scaled, whether linear interpolation
-#: should be used.
-
-# dynamic_background_opacity no
-
-#: Allow changing of the background_opacity dynamically, using either
-#: keyboard shortcuts (increase_background_opacity and
-#: decrease_background_opacity) or the remote control facility.
-
-# background_tint 0.0
-
-#: How much to tint the background image by the background color. The
-#: tint is applied only under the text area, not margin/borders. Makes
-#: it easier to read the text. Tinting is done using the current
-#: background color for each window. This setting applies only if
-#: background_opacity is set and transparent windows are supported or
-#: background_image is set.
-
-# dim_opacity 0.75
-
-#: How much to dim text that has the DIM/FAINT attribute set. One
-#: means no dimming and zero means fully dimmed (i.e. invisible).
-
-# selection_foreground #000000
-
-#: The foreground for text selected with the mouse. A value of none
-#: means to leave the color unchanged.
-
-# selection_background #fffacd
-
-#: The background for text selected with the mouse.
-
-
-#: The 256 terminal colors. There are 8 basic colors, each color has a
-#: dull and bright version, for the first 16 colors. You can set the
-#: remaining 240 colors as color16 to color255.
-
-# color0 #000000
-# color8 #767676
-
-#: black
-
-# color1 #cc0403
-# color9 #f2201f
-
-#: red
-
-# color2  #19cb00
-# color10 #23fd00
-
-#: green
-
-# color3  #cecb00
-# color11 #fffd00
-
-#: yellow
-
-# color4  #0d73cc
-# color12 #1a8fff
-
-#: blue
-
-# color5  #cb1ed1
-# color13 #fd28ff
-
-#: magenta
-
-# color6  #0dcdcd
-# color14 #14ffff
-
-#: cyan
-
-# color7  #dddddd
-# color15 #ffffff
-
-#: white
-
-# mark1_foreground black
-
-#: Color for marks of type 1
-
-# mark1_background #98d3cb
-
-#: Color for marks of type 1 (light steel blue)
-
-# mark2_foreground black
-
-#: Color for marks of type 2
-
-# mark2_background #f2dcd3
-
-#: Color for marks of type 1 (beige)
-
-# mark3_foreground black
-
-#: Color for marks of type 3
-
-# mark3_background #f274bc
-
-#: Color for marks of type 1 (violet)
-
-#: }}}
-
-#: Advanced {{{
-
-# shell .
-
-#: The shell program to execute. The default value of . means to use
-#: whatever shell is set as the default shell for the current user.
-#: Note that on macOS if you change this, you might need to add
-#: --login to ensure that the shell starts in interactive mode and
-#: reads its startup rc files.
-
-# editor .
-
-#: The console editor to use when editing the kitty config file or
-#: similar tasks. A value of . means to use the environment variables
-#: VISUAL and EDITOR in that order. Note that this environment
-#: variable has to be set not just in your shell startup scripts but
-#: system-wide, otherwise kitty will not see it.
-
-# close_on_child_death no
-
-#: Close the window when the child process (shell) exits. If no (the
-#: default), the terminal will remain open when the child exits as
-#: long as there are still processes outputting to the terminal (for
-#: example disowned or backgrounded processes). If yes, the window
-#: will close as soon as the child process exits. Note that setting it
-#: to yes means that any background processes still using the terminal
-#: can fail silently because their stdout/stderr/stdin no longer work.
-
-# allow_remote_control no
-
-#: Allow other programs to control kitty. If you turn this on other
-#: programs can control all aspects of kitty, including sending text
-#: to kitty windows, opening new windows, closing windows, reading the
-#: content of windows, etc.  Note that this even works over ssh
-#: connections. You can chose to either allow any program running
-#: within kitty to control it, with yes or only programs that connect
-#: to the socket specified with the kitty --listen-on command line
-#: option, if you use the value socket-only. The latter is useful if
-#: you want to prevent programs running on a remote computer over ssh
-#: from controlling kitty.
-
-# listen_on none
-
-#: Tell kitty to listen to the specified unix/tcp socket for remote
-#: control connections. Note that this will apply to all kitty
-#: instances. It can be overridden by the kitty --listen-on command
-#: line flag. This option accepts only UNIX sockets, such as
-#: unix:${TEMP}/mykitty or (on Linux) unix:@mykitty. Environment
-#: variables are expanded. If {kitty_pid} is present then it is
-#: replaced by the PID of the kitty process, otherwise the PID of the
-#: kitty process is appended to the value, with a hyphen. This option
-#: is ignored unless you also set allow_remote_control to enable
-#: remote control. See the help for kitty --listen-on for more
-#: details.
-
-# env 
-
-#: Specify environment variables to set in all child processes. Note
-#: that environment variables are expanded recursively, so if you
-#: use::
-
-#:     env MYVAR1=a
-#:     env MYVAR2=${MYVAR1}/${HOME}/b
-
-#: The value of MYVAR2 will be a/<path to home directory>/b.
-
-# update_check_interval 24
-
-#: Periodically check if an update to kitty is available. If an update
-#: is found a system notification is displayed informing you of the
-#: available update. The default is to check every 24 hrs, set to zero
-#: to disable.
-
-# startup_session none
-
-#: Path to a session file to use for all kitty instances. Can be
-#: overridden by using the kitty --session command line option for
-#: individual instances. See
-#: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty
-#: documentation for details. Note that relative paths are interpreted
-#: with respect to the kitty config directory. Environment variables
-#: in the path are expanded.
-
-# clipboard_control write-clipboard write-primary
-
-#: Allow programs running in kitty to read and write from the
-#: clipboard. You can control exactly which actions are allowed. The
-#: set of possible actions is: write-clipboard read-clipboard write-
-#: primary read-primary. You can additionally specify no-append to
-#: disable kitty's protocol extension for clipboard concatenation. The
-#: default is to allow writing to the clipboard and primary selection
-#: with concatenation enabled. Note that enabling the read
-#: functionality is a security risk as it means that any program, even
-#: one running on a remote server via SSH can read your clipboard.
-
-# allow_hyperlinks yes
-
-#: Process hyperlink (OSC 8) escape sequences. If disabled OSC 8
-#: escape sequences are ignored. Otherwise they become clickable
-#: links, that you can click by holding down ctrl+shift and clicking
-#: with the mouse. The special value of ``ask`` means that kitty will
-#: ask before opening the link.
-
-# term xterm-kitty
-
-#: The value of the TERM environment variable to set. Changing this
-#: can break many terminal programs, only change it if you know what
-#: you are doing, not because you read some advice on Stack Overflow
-#: to change it. The TERM variable is used by various programs to get
-#: information about the capabilities and behavior of the terminal. If
-#: you change it, depending on what programs you run, and how
-#: different the terminal you are changing it to is, various things
-#: from key-presses, to colors, to various advanced features may not
-#: work.
-
-#: }}}
-
-#: OS specific tweaks {{{
-
-# macos_titlebar_color system
-
-#: Change the color of the kitty window's titlebar on macOS. A value
-#: of system means to use the default system color, a value of
-#: background means to use the background color of the currently
-#: active window and finally you can use an arbitrary color, such as
-#: #12af59 or red. WARNING: This option works by using a hack, as
-#: there is no proper Cocoa API for it. It sets the background color
-#: of the entire window and makes the titlebar transparent. As such it
-#: is incompatible with background_opacity. If you want to use both,
-#: you are probably better off just hiding the titlebar with
-#: hide_window_decorations.
-
-macos_option_as_alt both
-