diff options
Diffstat (limited to 'app-editors/vim-core')
| -rw-r--r-- | app-editors/vim-core/files/vimrc-r8 | 209 | ||||
| -rw-r--r-- | app-editors/vim-core/vim-core-9.1.1652-r2.ebuild | 234 | ||||
| -rw-r--r-- | app-editors/vim-core/vim-core-9999.ebuild | 2 |
3 files changed, 444 insertions, 1 deletions
diff --git a/app-editors/vim-core/files/vimrc-r8 b/app-editors/vim-core/files/vimrc-r8 new file mode 100644 index 000000000000..3ad6ba14289e --- /dev/null +++ b/app-editors/vim-core/files/vimrc-r8 @@ -0,0 +1,209 @@ +scriptencoding utf-8 +" ^^ Please leave the above line at the start of the file. + +" Default configuration file for Vim + +" Written by Aron Griffis <agriffis@gentoo.org> +" Modified by Ryan Phillips <rphillips@gentoo.org> +" Modified some more by Ciaran McCreesh <ciaranm@gentoo.org> +" Added Redhat's vimrc info by Seemant Kulleen <seemant@gentoo.org> + +" You can override any of these settings on a global basis via the +" "/etc/vim/vimrc.local" file, and on a per-user basis via "~/.vimrc". You may +" need to create these. + +" {{{ General settings +" The following are some sensible defaults for Vim for most users. +" We attempt to change as little as possible from Vim's defaults, +" deviating only where it makes sense +set nocompatible " Use Vim defaults (much better!) +set bs=2 " Allow backspacing over everything in insert mode +set ai " Always set auto-indenting on +set history=50 " keep 50 lines of command history +set ruler " Show the cursor position all the time + +set viminfo='20,\"500 " Keep a .viminfo file. + +" Don't use Ex mode, use Q for formatting +map Q gq + +" When doing tab completion, give the following files lower priority. You may +" wish to set 'wildignore' to completely ignore files, and 'wildmenu' to enable +" enhanced tab completion. These can be done in the user vimrc file. +set suffixes+=.info,.aux,.log,.dvi,.bbl,.out,.o,.lo + +" When displaying line numbers, don't use an annoyingly wide number column. This +" doesn't enable line numbers -- :set number will do that. The value given is a +" minimum width to use for the number column, not a fixed size. +if v:version >= 700 + set numberwidth=3 +endif +" }}} + +" {{{ Modeline settings +" We don't allow modelines by default. See bug #14088 and bug #73715. +" If you're not concerned about these, you can enable them on a per-user +" basis by adding "set modeline" to your ~/.vimrc file. +set nomodeline +" }}} + +" {{{ Locale settings +" Try to come up with some nice sane GUI fonts. Also try to set a sensible +" value for fileencodings based upon locale. These can all be overridden in +" the user vimrc file. +if v:lang =~? "^ko" + set fileencodings=euc-kr + set guifontset=-*-*-medium-r-normal--16-*-*-*-*-*-*-* +elseif v:lang =~? "^ja_JP" + set fileencodings=euc-jp + set guifontset=-misc-fixed-medium-r-normal--14-*-*-*-*-*-*-* +elseif v:lang =~? "^zh_TW" + set fileencodings=big5 + set guifontset=-sony-fixed-medium-r-normal--16-150-75-75-c-80-iso8859-1,-taipei-fixed-medium-r-normal--16-150-75-75-c-160-big5-0 +elseif v:lang =~? "^zh_CN" + set fileencodings=gb2312 + set guifontset=*-r-* +endif + +" If we have a BOM, always honour that rather than trying to guess. +if &fileencodings !~? "ucs-bom" + set fileencodings^=ucs-bom +endif + +" Always check for UTF-8 when trying to determine encodings. +if &fileencodings !~? "utf-8" + " If we have to add this, the default encoding is not Unicode. + " We use this fact later to revert to the default encoding in plaintext/empty + " files. + let g:added_fenc_utf8 = 1 + set fileencodings+=utf-8 +endif + +" Make sure we have a sane fallback for encoding detection +if &fileencodings !~? "default" + set fileencodings+=default +endif +" }}} + +" {{{ Syntax highlighting settings +" Switch syntax highlighting on, when the terminal has colors +" Also switch on highlighting the last used search pattern. +if &t_Co > 2 || has("gui_running") + syntax on + set hlsearch +endif +" }}} + +" {{{ Terminal fixes +if &term ==? "xterm" + set t_Sb=^[4%dm + set t_Sf=^[3%dm + set ttymouse=xterm2 +endif + +if &term ==? "gnome" && has("eval") + " Set useful keys that vim doesn't discover via termcap but are in the + " builtin xterm termcap. See bug #122562. We use exec to avoid having to + " include raw escapes in the file. + exec "set <C-Left>=\eO5D" + exec "set <C-Right>=\eO5C" +endif +" }}} + +" {{{ Filetype plugin settings +" Enable plugin-provided filetype settings, but only if the ftplugin +" directory exists (which it won't on livecds, for example). +if isdirectory(expand("$VIMRUNTIME/ftplugin")) + filetype plugin on + + " Uncomment the next line (or copy to your ~/.vimrc) for plugin-provided + " indent settings. Some people don't like these, so we won't turn them on by + " default. + " filetype indent on +endif +" }}} + +" {{{ Fix &shell, see bug #101665. +if "" == &shell + if executable("@GENTOO_PORTAGE_EPREFIX@/bin/bash") + set shell=@GENTOO_PORTAGE_EPREFIX@/bin/bash + elseif executable("@GENTOO_PORTAGE_EPREFIX@/bin/sh") + set shell=@GENTOO_PORTAGE_EPREFIX@/bin/sh + endif +endif +"}}} + +" {{{ Our default /bin/sh is bash, not ksh, so syntax highlighting for .sh +" files should default to bash. See :help sh-syntax and bug #101819. +if has("eval") + let is_bash=1 +endif +" }}} + +" {{{ Autocommands +if has("autocmd") + +augroup gentoo + au! + + " Gentoo-specific settings for ebuilds. These are the federally-mandated + " required tab settings. See the following for more information: + " http://www.gentoo.org/proj/en/devrel/handbook/handbook.xml + " Note that the rules below are very minimal and don't cover everything. + " Better to emerge app-vim/gentoo-syntax, which provides full syntax, + " filetype and indent settings for all things Gentoo. + au BufRead,BufNewFile *.e{build,class} let is_bash=1|setfiletype sh + au BufRead,BufNewFile *.e{build,class} set ts=4 sw=4 noexpandtab + + " When editing a file, always jump to the last cursor position + autocmd BufReadPost * + \ if ! exists("g:leave_my_cursor_position_alone") | + \ if line("'\"") > 0 && line ("'\"") <= line("$") | + \ exe "normal! g'\"" | + \ endif | + \ endif + + " When editing a crontab file, set backupcopy to yes rather than auto. See + " :help crontab and bug #53437. + autocmd FileType crontab set backupcopy=yes + + " If we previously detected that the default encoding is not UTF-8 + " (g:added_fenc_utf8), assume that a file with only ASCII characters (or no + " characters at all) isn't a Unicode file, but is in the default encoding. + " Except of course if a byte-order mark is in effect. + autocmd BufReadPost * + \ if exists("g:added_fenc_utf8") && &fileencoding == "utf-8" && + \ ! &bomb && search('[\x80-\xFF]','nw') == 0 && &modifiable | + \ set fileencoding= | + \ endif + +augroup END + +endif " has("autocmd") +" }}} + +" We don't want VIM to load their own built-in defaults, preferring ours here +" instead. This option cannot apply to minimal builds, so it is guarded by a +" test that's guaranteed to fail for those, owing to the lack of +eval. +if 1 + let g:skip_defaults_vim = 1 +endif + +" Enable Omni completion when opening a file only if a specific plugin does +" not already exist for that filetype. This allows Omni completion +" (Ctrl-x/Ctrl-o) to work with any programming language if and only if a syntax +" file exists for the said language. +if exists("+omnifunc") + autocmd Filetype * + \ if &omnifunc == "" | + \ setlocal omnifunc=syntaxcomplete#Complete | + \ endif +endif + +" {{{ vimrc.local +if filereadable("@GENTOO_PORTAGE_EPREFIX@/etc/vim/vimrc.local") + source @GENTOO_PORTAGE_EPREFIX@/etc/vim/vimrc.local +endif +" }}} + +" vim: set fenc=utf-8 tw=80 sw=2 sts=2 et foldmethod=marker : diff --git a/app-editors/vim-core/vim-core-9.1.1652-r2.ebuild b/app-editors/vim-core/vim-core-9.1.1652-r2.ebuild new file mode 100644 index 000000000000..45a2f23708d2 --- /dev/null +++ b/app-editors/vim-core/vim-core-9.1.1652-r2.ebuild @@ -0,0 +1,234 @@ +# Copyright 1999-2025 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=8 + +# Please bump with app-editors/vim and app-editors/gvim + +VIM_VERSION="9.1" +VIM_PATCHES_VERSION="9.1.1432" +inherit desktop flag-o-matic prefix toolchain-funcs vim-doc xdg-utils + +if [[ ${PV} == 9999* ]] ; then + inherit git-r3 + EGIT_REPO_URI="https://github.com/vim/vim.git" + EGIT_CHECKOUT_DIR=${WORKDIR}/vim-${PV} +else + SRC_URI="https://github.com/vim/vim/archive/v${PV}.tar.gz -> vim-${PV}.tar.gz + https://gitweb.gentoo.org/proj/vim-patches.git/snapshot/vim-patches-vim-${VIM_PATCHES_VERSION}-patches.tar.bz2" + # https://github.com/douglarek/gentoo-vim-patches/releases/download/vim-${VIM_PATCHES_VERSION}-patches/vim-${VIM_PATCHES_VERSION}-patches.tar.gz" + KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~x64-solaris" +fi + +DESCRIPTION="vim and gvim shared files" +HOMEPAGE="https://www.vim.org https://github.com/vim/vim" +S="${WORKDIR}/vim-${PV}" + +LICENSE="vim" +SLOT="0" +IUSE="nls acl minimal" + +RDEPEND="dev-util/xxd" +# ncurses is only needed by ./configure, so no subslot operator required +DEPEND=">=sys-libs/ncurses-5.2-r2:0" +BDEPEND="dev-build/autoconf" + +if [[ ${PV} != 9999* ]]; then + # Gentoo patches to fix runtime issues, cross-compile errors, etc + PATCHES=( + "${WORKDIR}/vim-patches-vim-${VIM_PATCHES_VERSION}-patches" + ) +fi + +# unbundle xxd +PATCHES+=( "${FILESDIR}/vim-core-9.1.1652-r1-unbundle-xxd.patch" ) + +# platform-specific checks (bug #898406): +# - acl() -- Solaris +# - statacl() -- AIX +QA_CONFIG_IMPL_DECL_SKIP=( + 'acl' + 'statacl' +) + +pkg_setup() { + # people with broken alphabets run into trouble. bug #82186. + unset LANG LC_ALL + export LC_COLLATE="C" +} + +src_prepare() { + default + + # Fixup a script to use awk instead of nawk + sed -i \ + -e '1s|.*|#!'"${EPREFIX}"'/usr/bin/awk -f|' \ + "${S}"/runtime/tools/mve.awk || die "sed failed" + + # See bug #77841. We remove this file after the tarball extraction. + rm -v "${S}"/runtime/tools/vimspell.sh || die "rm failed" + + # Read vimrc and gvimrc from /etc/vim + echo '#define SYS_VIMRC_FILE "'${EPREFIX}'/etc/vim/vimrc"' >> "${S}"/src/feature.h || die + echo '#define SYS_GVIMRC_FILE "'${EPREFIX}'/etc/vim/gvimrc"' >> "${S}"/src/feature.h || die + + # Use exuberant ctags which installs as /usr/bin/exuberant-ctags. + # Hopefully this pattern won't break for a while at least. + # This fixes bug #29398 (27 Sep 2003 agriffis) + sed -i 's/\<ctags\("\| [-*.]\)/exuberant-&/g' \ + "${S}"/runtime/doc/syntax.txt \ + "${S}"/runtime/doc/tagsrch.txt \ + "${S}"/runtime/doc/usr_29.txt \ + "${S}"/runtime/menu.vim \ + "${S}"/src/configure.ac || die 'sed failed' + + # gcc on sparc32 has this, uhm, interesting problem with detecting EOF + # correctly. To avoid some really entertaining error messages about stuff + # which isn't even in the source file being invalid, we'll do some trickery + # to make the error never occur. bug 66162 (02 October 2004 ciaranm) + find "${S}" -name '*.c' | while read c; do + echo >> "$c" || die "echo failed" + done + + # Try to avoid sandbox problems. Bug #114475. + if [[ -d "${S}"/src/po ]]; then + sed -i -e \ + '/-S check.vim/s,..VIM.,ln -s $(VIM) testvim \; ./testvim -X,' \ + "${S}"/src/po/Makefile || die "sed failed" + fi + + cp -v "${S}"/src/config.mk.dist "${S}"/src/auto/config.mk || die "cp failed" + + # Fix bug #76331: -O3 causes problems, use -O2 instead. We'll do this for + # everyone since previous flag filtering bugs have turned out to affect + # multiple archs... + replace-flags -O3 -O2 + + # Fix bug #18245: Prevent "make" from the following chain: + # (1) Notice configure.ac is newer than auto/configure + # (2) Rebuild auto/configure + # (3) Notice auto/configure is newer than auto/config.mk + # (4) Run ./configure (with wrong args) to remake auto/config.mk + sed -i 's# auto/config\.mk:#:#' src/Makefile || die "Makefile sed failed" + + # Remove src/auto/configure file. + rm -v src/auto/configure || die "rm configure failed" + + # bug 908961 + if use elibc_musl ; then + sed -i -e '/ja.sjis/d' src/po/Make_all.mak || die + fi +} + +src_configure() { + emake -j1 -C src autoconf + + # This should fix a sandbox violation (see bug 24447). The hvc + # things are for ppc64, see bug 86433. + for file in /dev/pty/s* /dev/console /dev/hvc/* /dev/hvc*; do + if [[ -e "${file}" ]]; then + addwrite ${file} + fi + done + + # Let Portage do the stripping. Some people like that. + export ac_cv_prog_STRIP="$(type -P true ) faking strip" + + local myconf=( + --with-modified-by="Gentoo-${PVR} (RIP Bram)" + --enable-gui=no + --without-x + --disable-darwin + --disable-perlinterp + --disable-pythoninterp + --disable-rubyinterp + --disable-gpm + --disable-selinux + $(use_enable nls) + $(use_enable acl) + ) + + # Keep Gentoo Prefix env contained within the EPREFIX + use prefix && myconf+=( --without-local-dir ) + + if tc-is-cross-compiler ; then + export vim_cv_getcwd_broken=no \ + vim_cv_memmove_handles_overlap=yes \ + vim_cv_stat_ignores_slash=yes \ + vim_cv_terminfo=yes \ + vim_cv_toupper_broken=no + fi + + econf "${myconf[@]}" +} + +src_compile() { + emake -j1 -C src auto/osdef.h objects +} + +src_test() { :; } + +src_install() { + local vimfiles=/usr/share/vim/vim${VIM_VERSION/.} + + dodir /usr/{bin,share/{man/man1,vim}} + emake -C src \ + installruntime \ + installmanlinks \ + installmacros \ + installtutor \ + installtutorbin \ + installtools \ + install-languages \ + DESTDIR="${D}" \ + BINDIR="${EPREFIX}"/usr/bin \ + MANDIR="${EPREFIX}"/usr/share/man \ + DATADIR="${EPREFIX}"/usr/share + + keepdir ${vimfiles}/keymap + + # default vimrc is installed by vim-core since it applies to + # both vim and gvim + insinto /etc/vim/ + newins "${FILESDIR}"/vimrc-r8 vimrc + eprefixify "${ED}"/etc/vim/vimrc + + if use minimal; then + # To save space, install only a subset of the files. + # Helps minimalize the livecd, bug 65144. + rm -rv "${ED}${vimfiles}"/{compiler,doc,ftplugin,indent} || die + rm -rv "${ED}${vimfiles}"/{macros,print,tools,tutor} || die + rm -v "${ED}"/usr/bin/vimtutor || die + + for f in "${ED}${vimfiles}"/colors/*.vim; do + if [[ ${f} != */@(default).vim ]] ; then + printf '%s\0' "${f}" + fi + done | xargs -0 rm -f || die + + for f in "${ED}${vimfiles}"/syntax/*.vim; do + if [[ ${f} != */@(conf|crontab|fstab|inittab|resolv|sshdconfig|syntax|nosyntax|synload).vim ]] ; then + printf '%s\0' "${f}" + fi + done | xargs -0 rm -f || die + fi + + # install gvim icon since both vim/gvim desktop files reference it + doicon -s scalable "${FILESDIR}"/gvim.svg +} + +pkg_postinst() { + # update documentation tags (from vim-doc.eclass) + update_vim_helptags + + # update icon cache + xdg_icon_cache_update +} + +pkg_postrm() { + # Update documentation tags (from vim-doc.eclass) + update_vim_helptags + + # update icon cache + xdg_icon_cache_update +} diff --git a/app-editors/vim-core/vim-core-9999.ebuild b/app-editors/vim-core/vim-core-9999.ebuild index 8762bfea7cb1..0df0a4048b36 100644 --- a/app-editors/vim-core/vim-core-9999.ebuild +++ b/app-editors/vim-core/vim-core-9999.ebuild @@ -189,7 +189,7 @@ src_install() { # default vimrc is installed by vim-core since it applies to # both vim and gvim insinto /etc/vim/ - newins "${FILESDIR}"/vimrc-r7 vimrc + newins "${FILESDIR}"/vimrc-r8 vimrc eprefixify "${ED}"/etc/vim/vimrc if use minimal; then |